Table of Contents
How do I override my brother toner cartridge?
To enable or disable Continue Mode, follow the steps below:
- Press the Up or Down arrow key to choose General Setup, and then press OK.
- Press the Up or Down arrow key to choose Replace Toner, and then press OK.
- Press the Up or Down arrow key to choose Continue or Stop. Press Go.
How do I fix brother cartridge error?
The Cartridge Error message appears if the toner cartridge is not installed correctly. Remove the toner cartridge and drum unit assembly. Take out the toner cartridge, and put it back in the drum unit again. Reinstall the toner cartridge and drum unit assembly in the machine.
Is there a reset button on Brother printers?
Unplug all the interface cables before you perform a Factory Reset. Press the Up or Down arrow key to select Initial Setup, and then press OK. Press the Up or Down arrow key to select Reset, and then press OK. Press the Up or Down arrow key to select Factory Reset, and then press OK.
How to reset brother printer toner?
Below are the steps on how to reset Brother DCP, MFC and HL color printer toners . Step 1. Kindly make sure that your printer is turned on Step 2. Open the toner access door. A “Cover is Open” textbox will appear on the LCD. Step 3. Press the Clear/Back button to reach the Reset Menu Step 4.
How do I fix Brother HL 2140 toner life end error?
Brother HL 2140 Toner Life End Error Hack 1 Remove Drum and Toner Assembly. Remove the front access panel to access the drum and toner assembly. 2 Bypassing the Toner Sensors. Now that the toner cartridge is removed, pick it up and look for the glass window on the sides. 3 Test Run. 4 Resetting the Printer. 5 Status Page.
How do I reset the toner and error lights on my printer?
2. Press and hold the white button, while turning on the printer. The toner, drum and error lights should remain lit. 3. Release the white button and press it again twice. 4. Release, pause and press again five times.
How to reset printer toner access door?
Step 1. Kindly make sure that your printer is turned on Step 2. Open the toner access door. A “Cover is Open” textbox will appear on the LCD. Step 3. Press the Clear/Back button to reach the Reset Menu Step 4. Select your reset option on the Reset Menu Step 5.