Table of Contents
How do I set my Braeburn thermostat to manual?
To program your thermostat, you can follow the steps below.
- Press the ‘prog’ button on your thermostat.
- Press the system button until it lands on the cool or heat setting.
- Next, select the day/time button to create settings for each day.
- Use the arrow buttons to adjust the time and temperature you need.
How do I reset my Braeburn thermostat?
Remove the batteries (if equipped) and press the reset button located on the front of the thermostat. Replace the batteries and move the system switch to the HEAT or COOL position and try running your heating or cooling system again.
What is the hold button on the Braeburn thermostat?
HOLD Button: Enables extended hold, clears extended hold or temporary override. RETURN Button: Used to enter user settings and returns thermostat to normal mode from program mode. DAY/TIME Button: Selects hour, minute and day setting.
How do you control a Braeburn thermostat?
Braeburn Thermostat Instructions
- Press the “Date/Time” button on the keypad to set the day and time of your thermostat.
- Press the “Fan” button repeatedly to scroll through the different fan settings.
- Press and hold the “Return” button for four seconds.
- Press the “Prog” button to enter program setting mode.
How do you turn off the schedule on a Braeburn thermostat?
To reset a Braeburn thermostat, press the RESET button located inside a small hole on the front side of the thermostat using a toothpick, a paper clip, or a pin.
How do I reset my Braeburn 5000 thermostat?
Remove the batteries (if equipped) and press the reset button located on the front of the thermostat. Replace the batteries and move the system switch to the HEAT position and then try running your heating system (furnace) again.
Should I use the hold button on my thermostat?
Nope! This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.
Should thermostat be on AUTO or fan for heat?
If you want to keep the energy bills low, you should set the thermostat to ‘Auto’. However, if you prefer more even distribution of heat inside the house, it’s better that you set the thermostat setting to ‘On’.
Is it cheaper to leave thermostat on AUTO?
The general wisdom tends to be to keep the thermostat set to AUTO instead of ON. But is there really a difference? Absolutely! Keeping your thermostat set to “ON” can actually cost you more money, compromise the air quality in your home, and cause more maintenance issues.
What does permanent hold mean on thermostat?
The temporary hold setting is when you change the temperature setting to a different temperature and it stays at that setting until the next schedule change. The permanent hold setting holds the temperature setting you have chosen for an indefinite time. This overrides your scheduled settings.
What does the hold button on a thermostat mean?
This is where the “Hold” button on your thermostat comes into play. By pressing “Hold”, your thermostat will lock in the temperature it’s currently at until you change it again. When you are ready for your normal schedule to resume, simply press the “Run” button and return to your typical programming.