How do you use Tefal Ultraglide iron?

How do you use Tefal Ultraglide iron?

To do this, set the iron temperature button to the maximum position. Leave the item on a hanger and gently pull the fabric with one hand. Press the steam control button intermittently and move the iron from top to bottom. As the steam produced is very hot, it softens the fibres and removes creases.

How do you clean a Tefal Ultraglide soleplate?

Unplug your iron and, once cooled, wipe it with a soft cloth. Never use chemical or abrasive products. While the soleplate is still cool, clean it with a damp non-metallic pad. Never use chemical or abrasive products.

How do you clean a Tefal Ultraglide steam iron?

Unplug the iron then hold your iron horizontally above the sink. Remove the anti-scale valve (or set the control to self-clean/autoclean depending on the model). Steam, water and scale deposits will leave the steam chamber through the steam holes and the iron will be clean.

Why is my iron not getting hot?

CAUSE: One of the reasons for iron press not heating up could be the build-up of Limescale deposits on the soleplate. These deposits can clog the plate and the iron wont heat or produce steam properly in such a case. SOLUTION: To resolve this issue, switch the iron off and let it cool down.

How do I descale my Tefal Ultraglide anti-calc?

Self-cleaning: heat the iron, unplug it, remove the anti-calc valve and spray the iron over the sink. Cleaning the anti-calc valve: Remove the antiscale valve and soak the valve in a cup of white vinegar or plain lemon juice for 4 hours.

How do I make my iron hot?

  1. Make sure that your appliance is plugged into a working outlet.
  2. Check the power cable and make sure that it’s not damaged.
  3. Make sure the temperature adjustment knob is set above the MIN position.
  4. Once you plug in your iron and adjust the temperature, the thermostat indicator should light up.

Why is my iron not heating up?

Where do you put water in a Tefal iron?

Fill the tank. Water runs out of the holes of the soleplate. You are using steam for the first time or you have not used it for some time. Press on the steam control button away from your ironing board until the iron produces steam.

How do I get my steamer to work?

If you’ve decalcified your steamer and it’s still not working, check the water reservoir in your steamer. If the steamer runs out of the water, then steam will not produce. If you’ve been using the steamer consistently, the flow of steam will decrease until there is nothing left.

What is the brush attachment on a steamer for?

Another attachment most steamers come with is the fabric brush. The fabric brush is great for use on thicker items such as jackets, jumpers, coats and jeans or fabrics that are more inclined to pill. The fabric brush helps to remove fluff and relax the fibers in your clothes.