Is dichlor the same as chlorine?

Is dichlor the same as chlorine?

Dichlor, short for Dichloro-S- Triazinetrione, is one type of chlorine available for keeping pool water clean. Similar to trichlor, a different kind of chlorine, dichlor is usually granular but can also be found in tablets.

How much dichlor do you need to shock a pool?

How much shock do I need to shock my pool? A simple ratio and a standard rule of thumb to follow when you shock your pool is to dissolve one pound of either calcium hypochlorite or sodium dichlor for every 10,000 gallons of pool water.

What can I use instead of trichlor?

Calcium hypochlorite is a perfect alternative to trichlor tablets. In particular, slow-dissolving calcium hypochlorite tablets are more effective in sanitizing the pool.

Can you use dichlor shock in chlorine pool?

Dichlor—or “Dichloro-S-Triazinetrione” if you’re inclined—is one of five common types of chlorine that can be used to sanitize pool water, though it’s often compared to trichlor as they share many of the same properties.

Can you put too much shock in a pool?

Can you put too much shock in a pool? SKIMMER NOTES: It’s unlikely but it could happen. It would take a lot of shock to really make the water unsafe for swimming. The best way to make sure you’re safe to swim is to test your pool water and make sure free chlorine levels are between 1-4ppm for healthy swimming.

Do they make unstabilized chlorine tablets?

Unstabilized Chlorine Tablets Calcium hypochlorite is the most common unstabilized tablet on the market. You can still use them in an outdoor pool, but you’ll have to add cyanuric acid to the water to protect the unstabilized chlorine.

Does Trichlor add cyanuric acid?

2. Both dichlor and trichlor release cyanuric acid to the pool water. It is not necessary to put additional cyanuric acid into a pool that uses dichlor or trichlor.

Is all dichlor the same?

Note: Unlike trichlor, dichlor can comes in two sub-types. These are “dihydrate” (with water) and “anhydrous” (without water), though this difference is not visible to the human eye. Most dichlor products are dihydrate.

What is the difference between Cal Hypo and dichlor?

Dichlor shock is typically white in color; cal-hypo is typically white or gray in color. Dichlor shock contains about 10% Cyanuric Acid, which protects the chlorine in the product. Cal-hypo shock contains calcium, which allows it to be used as a maintenance or treatment product.

Can you mix Cal hypo and dichlor?

Is it okay to combine them together? No, it isn’t. Dichlor is rather sensitive to other chemicals. Remaining residue from other chemicals, including different chlorine and acid, will likely cause an adverse reaction, which may result in explosions depending on the conditions the chlorine is being stored or used in.