Why is my Kenmore refrigerator getting too cold?

Why is my Kenmore refrigerator getting too cold?

If the temperature control thermostat is not working properly, it may cause the refrigerant system to run longer than necessary. As a result, the refrigerator will be too cold. To determine if the thermostat is defective, rotate the thermostat from the lowest setting to the highest setting and listen for a click.

Why is my fridge running too cold?

Common causes of a fridge that’s too cold Improper temperature control. Low temperature setting. Airflow issues. Defrost system malfunctions.

Why is my food freezing in my refrigerator?

Damper Control Your refrigerator might be freezing your food because the damper is stuck open. To control the temperature of a refrigerator, a damper opens and closes to let air in from the freezer. If this mechanism falls into an open position, it will let too much cold air into the fresh food section.

Why is my refrigerator freezing on the lowest setting?

Your freezer may be too cold, sending excessive amounts of cold air into the refrigerator. You may not have enough food in the fridge, or your vent may not be circulating air properly. You may need to clean or replace the condenser coils. The door seals may be faulty.

Why does lettuce freeze in the refrigerator?

The air vent at the top of the refrigerator conducts that cold air, and any food placed directly underneath that vent gets the coldest air. Thus, leafy vegetables and food in the fridge freezes, especially those with a high water content.

Why is my lettuce freezing in the fridge?

Many factors can lead to frozen vegetables, from setting the refrigerator’s temperature too low to storing the produce in the wrong place, said Martha Reek, the lead consumer scientist at the Whirlpool Corporation. “The first thing you should do is check the temperature setting,” Ms.

Why is my fridge temperature too high?

If there are too many items in your fresh food compartment, that cold air may not circulate properly, resulting in a refrigerator that’s warm. It’s fairly common for a refrigerator to feel warm if it’s overstuffed, and this problem is obviously easy to resolve.

Where is the thermostat on a Kenmore refrigerator?

On most Kenmore models, the thermostat is on the back of the unit for side-by-side devices and at the bottom of the fridge for the over-under units. Remove the panel covering the thermostat. You may need to use a screwdriver in order to do so. Then, check the coils of the thermostat.

Why is my Refrigerator too cold?

Need Help Finding Your Model Number? When your fridge is too cold, it could be due to a problem in the cold control, a switch to send electricity to the fans and compressor that is triggered by temperature change.

How do I know if my Frigidaire refrigerator is cold enough?

Find the cold control: it will be the knob with a range starting at “off,” inside your fridge, where the food’s stored. When the knob is at midpoint of its range, the fridge should be at about 38 degrees F. Check to ensure that the sensor wire or bulb is in its place and shows no sign of damage.

What causes a refrigerator thermistor to overheat?

Learn more about replacing a refrigerator thermistor from Sears PartsDirect. The condenser fan is located next to the compressor and blows air across the condenser coils, which cools hot refrigerant from the compressor. A faulty fan increases the cabinet temperature, which can also overheat the compressor.

What should I do if my Refrigerator won’t cool?

If it’s locked up or runs without compressing refrigerant, then the entire part needs to be replaced. In this case, it’s recommended that you call a service technician, as the job will require the recovery and recharge of refrigerant. Learn more about troubleshooting a refrigerator that’s not cooling from Sears PartsDirect.